Most spec sheets put the Air Jordan 1 brooklyn Low heel height at roughly 1 inch at the back, or about 25 to 28 millimeters from the floor to the top of the heel midsole. That is a few millimeters more than a standard Air Jordan 1 Low and well short of a real platform. If you are writing a listing, call it a slightly lifted low-top and leave the word platform out of the copy.
This breakdown covers where the extra height comes from, how the model stacks up against other low-tops you probably stock, and a repeatable way to measure a pair Before you publish any spec claim.
Where the extra height actually comes from
The Brooklyn version sits on a modified midsole compared with the standard Low. A taller sidewall and a slightly thicker outsole do most of the work, so the lift is visual as much as physical. Nobody is walking on a wedge here.
That distinction drives how you merchandise the shoe. A customer hunting for a genuine platform will be disappointed. A customer who wants a low-top with a bit more presence under a wide-leg jean usually is not.
Heel stack compared with other low-tops you stock
Buyers often ask how the Air Jordan 1 Brooklyn Low heel height compares to a standard AJ1 Low, and the honest answer is that the gap is small enough most people will not feel it in hand. The ranges below come from physical pairs rather than published factory specs, so treat them as reference points.
| Model | Typical heel stack | Sizing | What to tell customers |
|---|---|---|---|
| Air Jordan 1 Low, OG tooling | About 23 to 26 mm | Men's and unisex | Flat feel, close to the ground |
| Air Jordan 1 Low Brooklyn | About 25 to 28 mm | Women's | Slightly lifted, not a platform |
| Air Jordan 1 Brooklyn, boot version | About 40 to 50 mm | Women's | True platform, different buyer |
| Nike Air Force 1 Low | About 28 to 30 mm | Men's and unisex | Taller than it looks in photos |
Treat every figure as a starting point. Last shape, outsole thickness, and production run all move the number by a couple of millimeters, and Jordan Brand does not publish heel stack for most inline models. Confirm with a physical pair before you print a number on a shelf tag or Product page.
What to put on the product page
State the Air Jordan 1 Brooklyn Low heel height in both inches and millimeters. Your customers search in inches, your factory paperwork will be in millimeters, and the two numbers keep you covered either way. Follow the figure with a plain-language version: about an inch at the heel, slightly more than a standard AJ1 Low.
Two other details cut returns. Mark the women's sizing clearly, and say whether the pair runs true to size. A taller sidewall can feel snug across the instep for wide-footed buyers, so a one-line fit note is cheaper than a return label.
How to measure a pair in the stockroom
Run this once per colorway and drop the result into your listing template. Variation between pairs is normal, because the Air Jordan 1 Brooklyn Low heel height is a range rather than a fixed figure.
- Stand the shoe on a flat counter and let it settle. Do not press down on the heel.
- Hold a steel ruler vertically at the center of the heel, flush against the outsole.
- Measure from the counter to the seam where the midsole meets the upper at the back.
- Take three readings, one at the center and one at each edge, then average them.
- Repeat on the other shoe. A mismatch above 2 mm is worth raising with your supplier.
- Photograph the ruler against the heel so your team can defend the number later.
Keep those photos on file. When a customer or a marketplace disputes a spec, a dated photo of the actual pair ends the conversation faster than any spreadsheet.
Fit questions that come with a taller sidewall
A thicker midsole changes the feel more than the fit. Expect a slightly stiffer ride out of the box and a break-in period of a few wears before the midsole softens under the heel. Tell repeat customers this up front and you avoid the "feels stiff" complaint.
Orthotic users should try the pair on before buying if they can. Inserts eat vertical room inside the shoe, and a lower-volume upper paired with a taller sole leaves less space than a standard AJ1 Low. Online, a short note about removable insoles does the same job.
Frequently asked questions
Does the extra height change how the shoe fits?
Not much. The upper sits on a similar last, so most buyers take their usual women's size. The difference shows up in the ride and the stance rather than the length. Anyone between sizes should still size up half a step and use a thin sock.
Can I list it as a platform sneaker?
You can, but you should not. An inch of heel stack does not meet what most shoppers picture when they search platform. Mislabeling it invites returns and one-star reviews from buyers expecting two inches or more. Call it a lifted low-top instead.
Is the height the same across all colorways?
Usually within a millimeter or two, but not guaranteed. Material changes, such as a canvas upper versus leather, can shift how the midsole seats. If you stock several colorways, measure one pair from each and note any outliers before publishing a single number sitewide.
How does it compare with the Air Jordan 1 Brooklyn boot?
They are different shoes for different customers. The boot version carries a much taller stacked sole in the 40 to 50 mm range and reads as a fashion platform. The Low stays close to a classic AJ1 profile with a modest lift, so do not merge the two in one listing.
If you are building a spring or back-to-school buy and need current availability, colorway breakdowns, and case packs on the Brooklyn Low, send over your size run and quantity targets. We will come back with a quote, lead times, and the measurements from our own sample pairs so your product pages go live with numbers you can stand behind.